<wbr id="5eyqo"></wbr>

<rp id="5eyqo"></rp>
  1. <rt id="5eyqo"></rt>

    <tt id="5eyqo"></tt>
    <video id="5eyqo"></video>
    English | 添加收藏 | 設為首頁
    您所在的位置:網站首頁 > > 產品中心 > 彈性體材料 > TPE熱塑性彈性體苯乙烯類熱塑性彈性體 SB-6000
    苯乙烯類熱塑性彈性體 SB-6000
    Styrene Thermoplastic Elastomeric Compound...
    型號:0

    參考價:¥

    說明:如您對該產品感興趣,請在此輸入您的手機號將本產品的地址 發送至您手機上。
    Product Description and Application 產品描述和用途 
    The SB-6000 series is IPN of styrene thermoplastic elastomeric compounds. There are no harmful contents, and have excellent physical and mechanical properties, and high-temperature resistant. There are rubber characteristics under -50℃conditions. The highest working temperature is 125℃. The range of hardness is from 50A to 40D. The tensile strength, elongation and elastic resilience can match TPU.
    TPE-EP6000系列是苯乙烯類熱塑性彈性體的互穿網絡聚合物(IPN),不含有害物質,具有優異的物理機械性能,耐高低溫性卓越,在-50℃時仍具有橡膠特性,最高工作溫度125℃,其硬度范圍50A~40D,其拉伸強度、伸長率和回彈性等可與聚氨酯(TPU)相媲美。
     
    SB-6000 series can be used for:
    l  Insulation jacketing of submarine cables and polar cables. Jacketing of various telephone lines and electrical wires under harsh environment
    l  Soft anti-flex cable jacketing of cable core under 90-125 ℃
    l  Fitness and sports apparatus, like chest developer, advanced gym shoes, etc,
    l  Rubber parts of medical appliance, seal parts and rubber parts of electric appliance
    l  Tenacity modification of plastics and engineering plastics.
    SB-6000系列彈性體可以用于:
    1、海底電纜,極地電纜的絕緣護套。嚴酷氣候下的各種電話線,電子線的護套;
    2、線芯溫度90-125 ℃的柔軟耐曲繞電纜護套;
    3、健身與體育用品;如擴胸器,高級運動鞋等;
    4、醫療器械橡膠件,密封件,電子電器用橡膠件;
    5、塑料與工程塑料的增韌改性。
     
    Processing Indicator 加工工藝 
    Machine Barrel Temperature
    機筒溫度
    Molding Temprature
    機頭溫度
    Melting Temperature
    熔體溫度
    150 – 180 ℃ 195 ±5℃ 175±5℃
     
    The temperature mentioned above is for reference only, and should be modified according to different structures of different extruders and screws.
    以上溫度僅作參考,根據擠出機及螺桿結構的不同,可相應調整。
     
    Dry Condition干燥條件 
    No need for drying in normal environment. If the compound was affected with damp, dry it in 90℃conditions for 2-3 hours, or in 70-80℃ for 3-4 hours. Keep the moisture content of compound smaller than 0.1wt%.
    一般不需干燥。如受潮,在90℃條件下干燥2-3小時,或在70-80℃條件下干燥3-4小時,保持樹脂含水量小于0.1wt%后再使用。
     

     
    Physical and Electrical Properties   物理及電氣性能
    Item
    試驗項目
    Unit
    單位
    Typical Data
    典型值
    SB-6001 SB-6002 SB-6003 SB-6004
    Density at 23℃
    23℃密度
    g/cm3 0.889 0.900 0.913 0.885
    Hardness
    硬度
    Share A 81 75 86 55
    Melt Flow Index
    熔體流動速率
    2.16kg×200℃
    g/10min
    0.31 0.48 ---- 0.48
    Tensile Strength
    拉伸強度
    MPa 17.6 20.5 19.5 15.5
    Spring Back
    回彈性
    % 54 ---- ---- ----
    Elongation at Break
    斷裂伸長率
    % 684 810 652 850
    Tensile Permanent Distortion
    拉伸永久變形
    % 5.5 ---- ---- ----
    Compression Set壓縮永久變形 70℃×22hr % 22 24 28 25
    120℃×22hr % 69.2 77.8 84.3 75.8
    Abrasion
    磨耗量(阿克。
    cm3/1.61kM 0.16 ---- ---- ----
    Ozone Resistance Aging
    耐臭氧老化
    50×10-8
    Tension 20%
    40℃×72hr
    No crack
    無裂紋
    No crack
    無裂紋
    No crack
    無裂紋
    No crack
    無裂紋
    Low Temperature Impact
    低溫沖擊
    -30℃ Pass
    通過
    Pass
    通過
    Pass
    通過
    Pass
    通過
    Brittleness Temperature
    脆性溫度
    -63.6 -61 -58.5 -65
    Air Aging Condition
    熱空氣老化條件
    156℃×168h
    Variation of Tensile Strength
    拉伸強度變化率
    % +79.3 +32.2 +25.5 +28.2
    Variation of Elongation
    斷裂伸長變化率
    % +35.5 +15.9 +30.3 +14.9
    Volume Resistivity at 20℃
    20℃體積電阻率
    Ω.cm 5.3x1014 4.6x1014 6x1014 6.5x1014

    在线成本人动漫视频网站-大香伊蕉在人线国产动画-老司机67194在线接播放-中文欧美亚洲欧日韩范冰冰-2019中文字幕乱码在线播放-国语自产精品视频在视频